Surface Prep Technician/Cleaner

Always There Personnel

Share:

Details:

Job Type:

Temp to Hire

Remote Status:

Apply Later:

Send this job to your inbox!

Surface Prep Technician/Cleaner

Mansfield, TX

ID16521085Posted 7/30/2025

NOW HIRING: Surface Prep Technician – Mansfield, TX Schedule: Monday–Friday | 6:00 AM – 3:00 PM Some Saturdays required (mandatory when needed) Pay: $18.00/hr. Join a hardworking team and help prepare parts for production with care and precision! Duties Include: Check & adjust cleaning solutions Load racks & prep each load for cleaning Stock, maintain, and operate equipment (hoses, brushes, air drills, etc.) Clean and refill activation & cleaning tanks Perform visual inspections of parts Report any safety concerns Requirements: Must read & write in English Must be able to lift heavy items and stand/walk all day Reliable attendance & punctuality are non-negotiable Willingness to work up to 10-hour shifts with little notice IMPORTANT: Leaving the production floor without notice is not acceptable. They have designated break and lunch times that MUST be followed. Call us for more info: 817-839-0617 or 817-305-6500 Apply in person: 230 NE Wilshire Blvd, Suite B Burleson, TX 76028 Send your resume to: janie@alwaystherepersonnel.net

Upload Resume*

First Name *

Last Name *

Email

Phone

Yes

No

Create a Job Alert

Get notified about new listings!

Submit a Resume

Can't find the job you want?

Submit a general application

NOW HIRING: Clamp Lift Operator / Material Handler – Coppell, TX START ASAP | 1st Shift Location: Coppell, TX Schedule: Mon-Wed | 6:00 AM – 7:00 PM Pay: $19.00/hr We’re looking for an experienced warehouse equipment operator to join our team! ✅ REQUIREMENTS: ✔️ 3+ years of recent warehouse experience as an operator✔️ Skilled in operating sit-down clamp lifts✔️ Experience with WMP & NERP systems✔️ Must demonstrate reach operator proficiency during an interview✔️ Basic inventory & quality control knowledge Don’t

Ministry Call Center

Now Hiring – Faith-Based Call Center | Customer Service Reps ? Location: Burleson, Tx. ? 24-Hour Call Center | Full-Time Opportunities ? Pay: $17.00 per hour ? Available Shifts: ? 2nd Shift: 5:00 PM – Midnight (Mon–Fri) ? 3rd Shift: Midnight – 10:00 AM You can work 10-hour shifts for 4 days (Sat-Tues.) or 8-hour shifts for 5 days (Mon-Friday) We’re looking for compassionate, dedicated individuals with a strong foundation in Christ to serve in a fast-paced, prayer-driven

Bilingual Production Coordinator

? NOW HIRING: Bilingual Production Coordinator! ? ? Alvarado , TX ? $20+ per hour (DOE) ? Mon–Fri, 8AM–5PM + Lots of OT (10–20 hrs/week) Are you bilingual in English & Spanish and ready to grow into a leadership role? We’re looking for a motivated, organized, and energetic Production Coordinator to join a Precast Concrete Manufacturing/Construction team! ? What You’ll Do: ✅ Support Production Managers & Leads ✅ Help coordinate schedules & workflows ✅ Monitor safety, efficiency & quality ✅ Contribute to training & improvement efforts ✅ Be

Mechanic - Dump Body Truck Installer

Dump Body Installers/Mechanics position available in Fort Worth, Tx. | $21-$30 per hour Duties and responsibilities are the installation and repair dump bodies, flatbeds, power take off systems, auxiliary lighting systems, toolboxes, and hitches, Ect. Must have ability to troubleshoot hydraulic, electrical, and pneumatic systems in a timely manner. Basic fabrication skills such as MIG welding, plasma torch, cutting, grinding, drill, measure, and fabricate as needed. (a unicorn with both installs/mechanic skills AND some welding ability would be “the cats

CSR/Outbound Shipping Clerk

NOW HIRING ASAP – CSR/Outbound Shipping Clerk! ? Location: Coppell, TX ? Pay Rate: $18.50/hr. ? Schedule: Mon–Fri | 6am-2:30pm ? Position Title: CSR / Outbound Shipping Clerk ? Requirements: ✔️ Shipping & receiving experience ✔️ Microsoft Excel skills ✔️ English proficiency ? Start Date: TBD (In-person interview required) ? Call Now: 817-305-6500 or 817-839-0617 ? Visit Us: 230 NE Wilshire Blvd. Suite B, Burleson, TX 76028 ? Email Resume To: janie@alwaystherepersonnel.net Tag someone who needs a job or apply today – we're hiring fast!

Safety Coordinator (construction)

WE’RE HIRING – SAFETY COORDINATOR NEEDED IN BURLESON, TX! START ASAP | $18–$20/hr | Full-Time | Monday–Friday, 8am–5pm Do you have experience in Safety Compliance and OSHA Standards? We’re looking for a motivated and detail-oriented Safety Coordinator to join our team immediately! Job Overview: Under the direction of the Quality Assurance Manager, you’ll be responsible for developing, implementing, and monitoring company safety programs. Ideal Candidate: Has previous safety experience (REQUIRED) Bilingual (preferred) Knowledge of OSHA regulations

Quality Assurance

NOW HIRING: Quality Assurance – Whitney & Blum, TX ? ? ASAP Start! ? Pay: $18–$19/hr ? Shift: 1st | 6:00 AM – 2:30 PM We’re looking for a dependable Quality Assurance professional to join a growing team in Whitney! ✅ 1–2 years of QC/QA experience required ✅ Experience in Quality Control is a huge plus ✅ Must be detail-oriented and reliable ? Call us for more info: 817-305-6500 or 817-809-1625 ? Visit us in person: 230 NE Wilshire Blvd, Suite B

Chemical Plater Technician

NOW HIRING: Chemical Plating Technicians – Mansfield, TX ? Pay: $20+/hr (based on experience) ? Location: Mansfield, TX We’re hiring 2 experienced Plating Technicians to join a dynamic, high-energy team! These positions are technical in nature and require higher-level candidates— ideally with backgrounds in chemistry or similar experience . ? Our most recent hires have held chemistry degrees, and we’re looking to maintain that same level of expertise. Key Responsibilities: ? Checking tanks, valves, and filters; bringing down baths ? Loading batches

Surface Prep Technician/Cleaner

NOW HIRING: Surface Prep Technician – Mansfield, TX Schedule: Monday–Friday | 6:00 AM – 3:00 PM Some Saturdays required (mandatory when needed) Pay: $18.00/hr. Join a hardworking team and help prepare parts for production with care and precision! Duties Include: Check & adjust cleaning solutions Load racks & prep each load for cleaning Stock, maintain, and operate equipment (hoses, brushes, air drills, etc.) Clean and refill activation & cleaning tanks Perform visual inspections of parts Report any safety concerns

NOW HIRING MIG WELDERS MID-LEVEL TO EXPERIENCED 6-10YRS Responsibilities: · Read blueprints and drawings and take or read measurements to plan layout and procedures · Ability to set own machinery to accommodations PAY RATE $18-$22 MON-FRIDAY 6AM-2:30pm Some Saturdays may apply

Shipping & Receiving

Shipping and handling position available in Blum, TX 1st shift: 6am - 2:30pm $17.00 DIRECT HIRE Will be responsible for the coordination of timely shipments of quality products and receiving of production materials and consumable supplies into the inventory system. Operate forklift. Prepare cover page for receiving inspection and combine with traveler and mark plates for ID. Prepare BOL. Data entry of all shipments. Maintain confidentiality of information where required. Knowledge of general computer programs (Microsoft, emails internet) Write routine

Industrial Maintenance Technician

NOW HIRING: Industrial Maintenance Technician – Blum, TX ? ? Shift: 2nd Shift Only | 2:00 PM – 10:30 PM | Monday–Friday ? Must be able to commute to Whitney, TX in under 1 hour| $23-$25 Join a great team and put your skills to work! You'll be performing preventative maintenance and repairs on mechanical, hydraulic, and basic electrical equipment, plus general facility and grounds maintenance. ? Reports directly to the Plant Manager ? 2–3 years of related experience required ? Backgrounds: No violence

Production Machine Operator

NOW HIRING – Production Machine Operators (2nd Shift) Location: Arlington, Tx. Schedule: 2nd Shift | Monday–Friday 2pm-11pm Pay: Competitive pay based on experience We’re looking for hands-on, experienced Production Machine Operators to join our fast-paced production team. This is not your typical machine operator job — you will be actively involved throughout the entire production process. What You’ll Be Doing: Preparing raw materials for production Operating machinery and moving along the production line Preparing finished products for

Machine Operator

Machine operator needed in Whitney, Tx. Schedules for all shifts available: 2nd shift 2pm-10:30pm, $18.50 3rd shift 10pm-6:30am, $19.00 MUST HAVE A CLEAN BG AND CAN'T DRIVE MORE THAN AN HOUR Job Description: YOU WILL BE RUNNING A MACHINE THAT PRODUCES THE MATERIAL. Some of the machines are CNC Machines. Give us a call (817) 305-6500 or (817) 839-0617 Send resume to carol@alwaystherepersonnel.net

Machine Operator

Machine operator in Blum, TX| No current experience required, they will train. 1st shift: 6am - 2:30pm $17.50 2nd shift 2pm-10:30pm, $18.50 Job Description: YOU WILL BE RUNNING MACHINE THAT PRODUCE THE EXPLOSIVE MATERIAL. Some of the machines are CNC Machines. MUST BE ABLE TO DRIVE TO BLUM IN UNDER AN HOUR. MUST HAVE A CLEAN BACKGROUND Give us a call (817)305-6500 or (817)809-1625 send resume to janie@alwaystherepersonnel.net

Production Position open in Blum, Tx. Schedules for all shifts available: 2nd shift 2pm-10:30pm, $17.50 3rd shift 10pm-6:30am, $18.00 Job Description : YOU WILL BE PRODUCING THE SHAPE CHARGES MUST BE ABLE TO GET TO BLUM IN LESS THAN AN HOUR DRIVE No current experience required; they will train for 2 weeks. MUST HAVE A CLEAN BACKGROUND Send resume to: carol@alwaystherepersonnel.net / Call: 817-305-6500 or 817-839-0617 for more information.

Injection Molding Technician

NOW HIRING: INJECTION MOLDING TECHNICIAN – ARLINGTON, TX $18–$24/hr. (Based on Experience) IMMEDIATE OPENINGS – START ASAP! We’re looking for experienced Injection Molding Operators to join a growing team molding casters (yes, like the wheels on grocery carts ). Requirements: MUST have Injection Molding experience Mechanically inclined and a critical thinker 2+ years required (5+ years preferred) Must be reliable & ready to work Some mandatory Saturdays when needed Shifts Available: 1st Shift: 8:00 AM – 4:30 PM (Monday–Friday

General labor/ Heavy lifter

Grand Prairie, TX

We are hiring in the Grand Prairie area! unloading a trailer in the warehouse NOT climate controlled and is based on weather. You will be lifting tires of all sizes. Must be bilingual Must be willing to learn If interested please give us a call (817)624-1777 I Visit us 2601 Airport Freeway, Suite 300 Fort Worth , TX 76111

Diesel Mechanic

Job Summary: We are seeking a skilled and experienced MIG Fabricator to join our team. This role is responsible for fabricating metal structures and components using MIG welding techniques, based on blueprints, specifications, and custom instructions. The ideal candidate is detail-oriented, safety-conscious, and has a strong background in mechanical systems and fabrication. Key Responsibilities: Read and interpret blueprints, technical drawings, and schematics Perform MIG (Metal Inert Gas) welding to assemble and fabricate metal components Operate fabrication equipment, including

NOW HIRING: Clerical-CSR – Everman, TX ? ? Pay: $18.50/hr. ? Shift C: 6:00 PM – 6:00 AM ? Workdays: Sunday–Wednesday | Off: Thursday–Saturday We're looking for a skilled and professional Dispatcher/CSR to join a growing team! Requirements: ✅ Customer service experience ✅ Strong Microsoft Office & Outlook skills ✅ Excellent phone and people skills – professional and confident with customers ✅ Self-motivated and able to multitask ✅ Reliable transportation ➕ AS400 experience is a plus ➕ Inventory or material handling background is a bonus ? Call or

Loading Jobs...